Haven't updated in a while...

It's been a while. I haven't posted in a while, not because I haven't been working on the boat, but I consistently have forgotten to take pictures. I remembered to bring the camera today.

Over the last few days I have been working on the rear facing seats. I stained and varnished the base of the seats, and fitted them into place. I had to cut a 1/2 inch out of 3 of the floorboards so that the seat base would fit between them on the stringers.

I also finished joining all of the 1x10 boards, and I scribed and cut the seat and seat back for one of the seats. I sanded them smooth and applied a coat of stain. and the first coat of varnish (today).

Out in the boat, I finished painting the floorboards (4 coats) and placed them in position. I'll have to make one new section of floorboard where the center console used to be. Right now I just have a scrap piece covering the hole. The floorboards are not screwed in yet because I'll still need to get under them before I'm all done. I also did a little cleaning. It was getting pretty dusty in there.